Avaya X330WAN - Manual (Page 163)

Frame Relay Configuration CLI Commands
Avaya X330WAN User’s Guide 141
cir out (Map-class context)
Use the cir out command to set the CIR for the map-class Frame Relay. The no
form of this command restores the default value (56000 bps).
Syntax
[no] cir out <bits>
Parameters
Example
X330WAN-2USP-1(super-map-class)# cir out
clear frame-relay counters
Use the clear frame-relay counters command to clear the Frame Relay
counters.
Syntax
clear frame-relay counters
Example
X330WAN-2USP-1(super)# clear frame-relay counters
de-buffer-size (Frame Relay Serial interface context)
Use the de-buffer-size command to set the buffer size for frames marked as
drop-eligible.
Syntax
[no] de-buffer-size <size>
Parameters
Example
X330WAN-2USP-1(super-map-class)# de-buffer-size 200
bits The CIR in bits per second (bps).
size The drop-eligible (DE) buffer size in packets.