Line (banner login/post-login context), Nvram initialize – Avaya X330WAN User Manual
Page 119
General: Device Commands
Avaya X330WAN User’s Guide
97
line (Banner login/post-login context)
Use the
line
command to add a line to the current banner message.
Syntax
line
<number> [string]
Parameters
Note:
To define a string that includes spaces, enclose the entire string in quotation
marks (e.g., "New York").
Example
X330WAN-2DS1-1(super-banner-post-login)# line 3 “You have
successfully logged off”
nvram initialize
Use the
nvram initialize
command to reset the WAN parameters to the factory
defaults.
Syntax
nvram initialize
Example
X330WAN-2DS1-1(super)# nvram initialize
This command will restore factory defaults, and can disconnect your
telnet session
*** Reset *** - do you want to continue (Y/N)?
Connection closed by foreign host.
host%
number
The line number to add the specified text.
string
The text to display on the specified line.