Configuration example for site a – Avaya X330WAN User Manual

Page 82

Advertising
background image

Chapter 4

Operational Concepts and Configuration Examples

60

Avaya X330WAN User’s Guide

Configuration Example for Site A

The following is the configuration procedure for the X330WAN-2USP, as shown in
Figure 4.10. Commands with footnotes are described at the end of the configuration
procedure.

Loopback and PMI interfaces configuration:

X330WAN-2USP-1(super)# interface Loopback 1

X330WAN-2USP-1(super-if:Loopback1)# ip address 10.10.10.10 24

The Primary management interface has changed. Please copy the running

configuration to the start-up configuration file, and reset the

device.

X330WAN-2USP-1(super-if:Loopback1)# exit

X330WAN-2USP-1(super)# copy running-config startup-config

X330WAN-2USP-1(super)# reset

FabricFastEthernet interface configuration:

X330WAN-2USP-1(super)# interface FabricFastEthernet 1:1

X330WAN-2USP-1(super-if:FabricFastEthernet1:1)# ip address

1.1.1.1 24

X330WAN-2USP-1(super-if:FabricFastEthernet1:1)# exit

X330WAN-2USP-1(super)# interface FabricFastEthernet 1:1.1

X330WAN-2USP-1(super-subif:FabricFastEthernet1:1.1)# ip address

149.49.54.80 24

X330WAN-2USP-1(super-if:FabricFastEthernet1:1.1)# exit

X330WAN-2USP-1(super)# interface FabricFastEthernet 1:2

X330WAN-2USP-1(super-if:FabricFastEthernet1:2)# ip address

11.11.11.1 24

X330WAN-2USP-1(super-if:FabricFastEthernet1:2)# exit

Configuration of a Policy list with the appropriate DSCP-CoS mappings:

X330WAN-2USP-1(super)# set qos policy-source local

X330WAN-2USP-1(super)# ip access-list-name 100 voice

X330WAN-2USP-1(super)# ip access-list-dscp operation 100 34 fwd7

(1)

X330WAN-2USP-1(super)# ip access-list-dscp operation 100 46 fwd6

(2)

X330WAN-2USP-1(super)# ip access-list-dscp trust 100 trust-cos-dscp

(3)

Activating the Policy List on the FabricFastEthernet interface:

X330WAN-2USP-1(super)# interface FabricFastEthernet 1

X330WAN-2USP-1(super-if:FabricFastEthernet1)# ip access-group 100 in

X330WAN-2USP-1(super-if:FabricFastEthernet1)# exit

Serial interface configuration:

X330WAN-2USP-1(super)# interface Serial 1

X330WAN-2USP-1(super-if:Serial1)# ip address 2.2.2.1 24

X330WAN-2USP-1(super-if:Serial1)# mtu 300

Advertising