Avaya X330WAN - Manual (Page 123)

General: Device Commands
Avaya X330WAN User’s Guide 101
set snmp trap disable frame-relay
Use the set snmp trap disable frame-relay command to disable the DLCI link
stat SNMP traps. The traps are disabled by default.
Syntax
set snmp trap disable frame-relay
Example
X330WAN-2DS1-1(super)# set snmp trap disable frame-relay
set system contact
Use the set system contact command to set the system contact.
Syntax
set system contact [contact string]
Parameters
Example
X330WAN-2DS1-1(super)# set system contact "Gabby ext.545"
set system location
Use the set system location command to set the system location.
Syntax
set system location [location string]
Parameters
Example
X330WAN-2DS1-1(super)# set system location "Floor 5,Room 12"
contact string Contact person. The contact person field is cleared if this field is
left blank. A string of two words or more must be typed in
quotation marks (e.g., “John Smith”).
location string Location name. The location name is cleared if this field is left
blank. A string of two words or more must be typed in
quotation marks (e.g., “Operations Floor”).