Security, Convergence, Avaya x330wan network management – Avaya X330WAN User Manual
Page 28: Command line interface (cli), Security convergence, Describ
Chapter 1
Introduction
6
Avaya X330WAN User’s Guide
Security
Currently security can be implemented with X330WAN by connecting the
X330WAN’s Fast Ethernet port via an external firewall to a port on the P330 switch.
The X330WAN module is connected to the Internet via its WAN ports. For more
information and a sample configuration, refer to "Configuring the X330WAN for
use with an External Firewall" on page 43.
Note:
X330WAN contains the infrastructure for all security functionality planned
for future releases, such as Firewall and VPN. Licenses will be issued for the
different security options as the features become available.
Convergence
X330WAN enables a combined data and VoIP solution when used in conjunction
with a VoIP gateway, such as the Avaya S8300 Media Server. You can build your
VoIP network using several topologies, such as:
•
Connecting a S8300 Media Server or G700 Media Gateway to the LAN’s
P333T/P333T-PWR/P330 stack, and inserting X330WAN in an expansion slot
of one of the above devices.
•
Connecting a DEFINITY with Prowler and CLAN cards to the LAN’s
P333T/P333T-PWR/P330 stack, and inserting X330WAN in an expansion slot
of one of the above devices.
In addition, you need to connect standard IP phones to the P330 stack in either of
the above topologies, or Avaya Legacy phones directly to the G700 Media Gateway.
Using these solutions, X330WAN provides access to the corporate WAN with end-
to-end QoS and Policy, ensuring the flawless functioning of the IP telephony.
Avaya X330WAN Network Management
Comprehensive network management is a key component of today’s networks.
Avaya provides multiple ways of managing X330WAN to suit your needs.
Command Line Interface (CLI)
The Avaya P330 CLI enables local or remote configuration of X330WAN. X330WAN
configurations are saved in CLI format.
The X330WAN CLI is accessed via one of the following:
•
Telnet to one of the IP interfaces of X330WAN.
•
Use the
session wan
command from the Layer 2 agent of the stack, i.e. the
Console port of the P330 stack master.