Avaya X330WAN - Manual (Page 214)

Chapter 6 X330WAN CLI Commands
192 Avaya X330WAN User’s Guide
network (Router-RIP context)
Use the network command to specify a list of networks on which the RIP is
running. The no form of this command removes an entry.
Syntax
[no] network <ip-address> [<wildcard-mask>]
Parameters
Example
To specify that RIP is used on all interfaces connected to the network 192.168.37.0:
X330WAN-2DS1-1(configure router:rip)# network 192.168.37.0
no ip distribution access-list
Use the no ip distribution access-list command to delete a distribution list
statement.
Syntax
no ip distribution access-list <access-list-number>
[<access-list-index>
Parameters
Example
X330WAN-2DS1-1(configure)# no ip distribution access-list 1
X330WAN-2DS1-1(configure)# no ip distribution access-list 2 25
Note: If a list index is not given in the no ip distribution access-list
command, all rules are deleted.
ip-address The IP address of the network of directly connected networks.
wildcard-mask Wildcard mask address. This parameter provides compatibility
with the P550.
access-list-number An integer from 1 to 99.
access-list-index An integer.