Avaya X330WAN - Manual (Page 238)

Chapter 6 X330WAN CLI Commands
216 Avaya X330WAN User’s Guide
ip composite-op notify
Use the ip composite-op notify command to set the trap mode of a composite
operation in a Policy list.
Syntax
ip composite-op notify <policy-list-number> <composite-operation-
index> <notify>
Parameters
Example
X330WAN-2DS1-1(configure)# ip composite-op notify 101 17 send-trap
ip composite-op priority
Use the ip composite-op priority command to set the Layer 2 priority of a
Policy operation.
Syntax
ip composite-op priority <list-number> <composite-op-index>
<priority>
Parameters
Example
X330WAN-2DS1-1(configure)# ip composite-op priority 101 17 fwd1
X330WAN-2DS1-1(configure)# ip composite-op name 101 17 gold-account
policy-list-number An integer from 100 to 149, where 0 is the default list.
composite-operation-index Index of operation in the table.
notify send-trap | no-trap
list-number An integer from 100 to 149, where 0 is the default list.
composite-op-index Index of operation in the table.
priority fwd0-7|no-change