Avaya X330WAN - Manual (Page 197)

Layer 3 CLI Commands
Avaya X330WAN User’s Guide 175
ip distribution access-list-copy
Use the ip distribution access-list-copy command to copy the distribution
access-list.
Syntax
ip distribution access-list-copy <source-list> <destination-list>
Parameters
Example
X330WAN-2DS1-1(configure)# ip distribution access-list-copy 1 3
ip distribution access-list-name
Use the ip distribution access-list-name command to set the distribution list
name.
Syntax
ip distribution access-list-name <distribution-list-number> <name>
Parameters
Note: To define a name that includes spaces, enclose the entire name in quotation
marks (e.g., “New York”).
Example
X330WAN-2DS1-1(configure)# ip distribution access-list-name 5
"evening"
source-list An integer from 1 to 99.
destination-list An integer from 1 to 99.
distribution-list-number An integer from 1 to 99.
name List name.