Avaya X330WAN - Manual (Page 124)

Chapter 6 X330WAN CLI Commands
102 Avaya X330WAN User’s Guide
set system name
Use the set system name command to set the system name.
Syntax
set system name [name string]
Parameters
Example
X330WAN-2DS1-1(super)# set system name "Banking System"
set time client
Use the set time client command to enable or disable the periodic network
time acquisition by the device from the network time server (SNTP or TIME
protocol).
Syntax
set time client {enable|disable}
set time protocol
Use the set time protocol command to set the protocol for use in the system as
either SNTP protocol or TIME protocol.
Syntax
set time protocol [sntp-protocol|time-protocol]
Example
X330WAN-2DS1-1(super)# set time protocol sntp-protocol
The protocol has been set to SNTP protocol
Example
X330WAN-2DS1-1(super)# set time protocol time-protocol
The protocol has been set to TIME protocol
name string System name. The system name is cleared if this field is left blank.
A string of two words or more must be typed in quotation marks
(e.g., “Backbone Stack”).