Avaya X330WAN User Manual
Page 91
VoIP Implementation with a G700 Media Gateway and an S8300 Media Server
Avaya X330WAN User’s Guide
69
Configuration Example 2 for Site A - Two VCs Between Sites
Following is the configuration procedure for the X330WAN-2USP, as shown in
Figure 4.11. Commands with footnotes are described at the end of the configuration
procedure.
•
Loopback and PMI interfaces configuration:
X330WAN-2USP-1(super)# interface Loopback 1
X330WAN-2USP-1(super-if:Loopback1)# ip address 10.10.10.10 24
The Primary management interface has changed. Please copy the running
configuration to the start-up configuration file, and reset the
device.
X330WAN-2USP-1(super-if:Loopback1)# exit
X330WAN-2USP-1(super)# copy running-config startup-config
X330WAN-2USP-1(super)# reset
•
FabricFastEthernet interface configuration:
X330WAN-2USP-1(super)# interface FabricFastEthernet 1:1
X330WAN-2USP-1(super-if:FabricFastEthernet1:1)# ip address 1.1.1.1
24
X330WAN-2USP-1(super-if:FabricFastEthernet1:1)# exit
X330WAN-2USP-1(super)# interface FabricFastEthernet 1:1.1
X330WAN-2USP-1(super-subif:FabricFastEthernet1:1.1)# ip address
149.49.54.80 24
X330WAN-2USP-1(super-if:FabricFastEthernet1:1.1)# exit
X330WAN-2USP-1(super)# interface FabricFastEthernet 1:2
X330WAN-2USP-1(super-if:FabricFastEthernet1:2)# ip address
11.11.11.1 24
X330WAN-2USP-1(super-if:FabricFastEthernet1:2)# exit
•
Configuration of a Policy list with the appropriate DSCP-CoS mappings:
X330WAN-2USP-1(super)# set qos policy-source local
X330WAN-2USP-1(super)# ip access-list-name 100 voice
X330WAN-2USP-1(super)# ip access-list-dscp operation 100 34 fwd7
X330WAN-2USP-1(super)# ip access-list-dscp operation 100 46 fwd6
X330WAN-2USP-1(super)# ip access-list-dscp trust 100 trust-cos-dscp
•
Activating the Policy List on the FabricFastEthernet interface:
X330WAN-2USP-1(super)# interface FabricFastEthernet 1
X330WAN-2USP-1(super-if:FabricFastEthernet1)# ip access-group 100 in
X330WAN-2USP-1(super-if:FabricFastEthernet1)# exit
•
Map-class configuration:
X330WAN-2USP-1(super)# map-class frame-relay voip
X330WAN-2USP-1(super-map-class)# cir out 128000
(1)
X330WAN-2USP-1(super-map-class)# bc out 16000
(2)
X330WAN-2USP-1(super-map-class)# exit