Avaya X330WAN - Manual (Page 223)

Layer 3 CLI Commands
Avaya X330WAN User’s Guide 201
show ip ospf neighbor
Use the show ip ospf neighbor command to display OSPF neighbor
information on a per-interface basis.
Syntax
show ip ospf neighbor
[<interface-name>] [<neighbor-id>]
Parameters
Note: To define a name that includes spaces, enclose the entire name in quotation
marks (e.g., “New York”).
Example
X330WAN-2DS1-1(super router:ospf)# show ip ospf neighbor
Nbr-Id Priority State Router ID Time To Live
--------------- ---------- ---------- --------------- --------------
10.0.17.2 1 2 Way 212.150.244.1 36
10.0.17.3 12 Full 10.0.17.3 38
10.0.17.6 18 Full 10.0.17.6 33
10.0.18.2 1 Full 105.1.12.1 107
10.0.20.2 0 Full 62.56.252.253 40
18.18.18.2 1 Full 62.56.255.254 38
192.168.6.173 0 Full 172.18.21.254 4
show ip protocols
Use the show ip protocols command to display parameters and statistics of the IP
routing protocol process.
Syntax
show ip protocols [<protocol>]
Parameters
Example
show ip protocols Displays all running protocols details.
interface-name A string representing the OSPF interface name.
neighbor-id The OSPF Neighbor ID, an IP address.
protocol RIP | OSPF