Install slot filler covers, Slot filler covers – Rockwell Automation 1715-OF8I Redundant I/O System User Manual User Manual

Page 120

Advertising
background image

120

Rockwell Automation Publication 1715-UM001C-EN-P - March 2014

Chapter 2

Installation Instructions

8. If the module is installed next to other modules that are already online, the

start-up sequence completes.

When startup is complete, the status indicators light as follows.

If the module fails to go online, see the troubleshooting guide in

Chapter 8.

Install Slot Filler Covers

To install the slot filler covers, follow these steps.

1. Place a slot filler cover on the empty slot.
2. Screw the clamp screw 90° to the lock position by using a 9 mm

screwdriver.

1715-IB16D, 1715-OB8DE, 1715-IF16 Modules

1715-OF8I Module

Indicator

Status

Indicator

Status

Module Status

Green

Module Status

Green

Redundancy Status

Green

Redundancy Status

Red to steady green

Network Status

Green

Network Status

Amber

Channel 0…7, 8…15

Inputs show Green;

Outputs show Amber

Channel 0…7

Inputs show Green;

Outputs show Amber

CH1

CH1

CH1

CH1

CH1

CH1

CH1

CH1

TERMINAL IDENTITY

AOTA

Dual.

Ethernet 1
Ethernet 2

Reset

Ethernet 1
Ethernet 2

Reset

Rack Status

Module Status

Redundancy Status

Network Status

Rack Status

Module Status

Redundancy Status

Network Status

Slot Filler Covers

32078-M

Advertising