Rockwell Automation 1715-OF8I Redundant I/O System User Manual - Manual (Page 33)

Rockwell Automation Publication 1715-UM001C-EN-P - March 2014 33
Chapter
2
Installation Instructions
This chapter explains how to build the 1715 Redundant I/O System. These
installation instructions include how to build the backplane by connecting the
adapter and I/O base units and mounting them on DIN rails within a cabinet,
how to install and wire the termination assemblies, how to mount the adapter
and the I/O modules onto the system, and how to use expansion cables to allow
for additional space requirements for the system within an enclosure.
Topic Page
Before You Begin 37
System Hardware Components 39
System Software 54
Module Placement 55
Install Summary 58
Product Dimensions 59
DIN Rail Assembly 60
Install the Power Supply 63
Install the Adapter Base Unit 64
Install the I/O Base Unit 64
Install Termination Assembly to I/O Base Unit 67
Mount I/O Expansion Cable 70
Wire the Adapter 76
Connect Field Wiring 79
Connect the Adapter to the Ethernet Network 102
Module Keying 103
Install the Adapter Modules 107
Assign an IP Address 111
Install the I/O Modules 117
Install Slot Filler Covers 120
Remove Modules 121