Sil 2 safety application requirements 202, 1715 i/o modules in sil 2 safety applications 202, Typical configurations 204 – Rockwell Automation 1715-OF8I Redundant I/O System User Manual User Manual

Page 9: Internal diagnostics 206, Power supplies 206, Requirements for using 1715 i/o modules 207, Energize-to-action requirements 207, Add-on instructions 208, Connection reaction time limit 209, Using the 1715 adapter in sil 2 applications 209

Advertising
background image

Rockwell Automation Publication 1715-UM001C-EN-P - March 2014

9

Table of Contents

Chapter 6

1715 Redundant I/O System in SIL 2
Safety Applications

SIL 2 Safety Application Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . 202

1715 I/O Modules in SIL 2 Safety Applications . . . . . . . . . . . . . . . . . . . 202

Typical Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204

Internal Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206

Power Supplies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206

Requirements for Using 1715 I/O Modules . . . . . . . . . . . . . . . . . . . . . . . 207

Energize-to-action Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207

Requirements for ControlLogix-based SIL 2 Applications . . . . . . . . . . 208

Add-On Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208

Connection Reaction Time Limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209

Using the 1715 Adapter in SIL 2 Applications. . . . . . . . . . . . . . . . . . . . . 209

Reaction to Faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210

Using 1715 I/O Modules in SIL 2 Applications . . . . . . . . . . . . . . . . . . . 210

Input Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210

Considerations for Sensor and Actuator Configurations. . . . . . . . . . . . 214

Configure SIL 2 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214

Enable SIL 2 Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215

Specify the Connection Reaction Time Limit and

Requested Packet Interval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215

Set Safe State Values for Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218

Check SIL 2 Reset Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219

View Module Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219

Diagnostic Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219

Reaction Times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220

System Reaction Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220

Logix System Reaction Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221

Configuring the SIL 2 Task Period and Watchdog . . . . . . . . . . . . . . . . . 222

SIL Task/Program Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222

Additional Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222

Chapter 7

Using SIL 2 Add-On Instructions with
1715 Redundant I/O Modules

SIL 2 Add-On Instructions Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223

SIL 2 Check Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227

Add-On Instruction Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227

Add-On Instruction Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228

Download and Import the Add-On Instructions. . . . . . . . . . . . . . . . . . . 229

Import Add-On Instructions to Upgraded Projects. . . . . . . . . . . . . 230

Create a Periodic Task for

SIL 2 Safety Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230

1715 SIL 2 Periodic Task ‘Period’ Configuration. . . . . . . . . . . . . . . 231

Configure an Input Module Add-On Instruction . . . . . . . . . . . . . . . . . . 234

Configure an Output Module Add-On Instruction . . . . . . . . . . . . . . . . 238

AOI Scan Times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240

Safety Reaction Time Calculations. . . . . . . . . . . . . . . . . . . . . . . . . . . . 240

Advertising