Rockwell Automation 1715-OF8I Redundant I/O System User Manual - Manual (Page 186)

186 Rockwell Automation Publication 1715-UM001C-EN-P - March 2014
Chapter 5 Configure the Redundant I/O System
A new General tab appears in Simplex mode.
Notice there is now only one slot number available and Redundant is ‘No’,
indicating that the module is now in Simplex mode.
5. Click the Connection tab, referring to page 163 .
6. Click the Module Info tab, referring to page 165 .
7. Click the Configuration tab, referring to page 183 .
8. Click the Fault/Program Action tab, referring to page 184 .
9. Click OK.
Your project’s I/O configuration folder now looks similar to this.