Recommended circuits for digital outputs – Rockwell Automation 1715-OF8I Redundant I/O System User Manual User Manual
Page 87
Rockwell Automation Publication 1715-UM001C-EN-P - March 2014
87
Installation Instructions
Chapter 2
Field Loop Circuits for Digital Inputs
The recommended digital input field loop circuits for the 1715-IB16D digital
input module are shown on page
.
For line monitored digital input loop circuit wiring and recommended threshold
values, se
Recommended Circuits for Digital Outputs
This circuit is suitable for simplex and duplex configurations of digital output
modules. The two 10 A fuses shown are supplied with the adapter in the output
termination assembly. They protect all of the output circuits associated with the
particular termination assembly.
ATTENTION: For inductive loads, connect a diode at the actuator to protect the
adapter against back EMF.
46198