Rockwell Automation 1715-OF8I Redundant I/O System User Manual - Manual (Page 71)

Rockwell Automation Publication 1715-UM001C-EN-P - March 2014 71
Installation Instructions Chapter 2
Expansion Cable
The expansion cable has a left cable adapter and a right cable adapter. Connect
one end to the right-hand bus connector of an I/O base (or adapter base) unit.
The other end connects to the left-hand bus connector of an I/O base unit.
Figure 26 - I/O Expansion Cable Adapters
Expansion cables are available in 2 m (78.74 in.) lengths.
Cable Adapter
32086-M
Cable Adapter
Item Description
1 Cable socket assembly
2 SCS1-3 cable
3 Ferrite
4 Cable plug assembly
TIP Terminators are not required at the end of the bus (last base unit).