Rockwell Automation 1715-OF8I Redundant I/O System User Manual - Manual (Page 180)

180 Rockwell Automation Publication 1715-UM001C-EN-P - March 2014
Chapter 5 Configure the Redundant I/O System
A Verify Module Properties dialog box appears.
7. Click Yes.
A new General tab appears in Simplex mode.
Notice there is now only one slot number displayed and Redundant now is
‘No’.
8. Click the Connection tab, referring to page 163 .
9. Click the Module Info tab, referring to page 165.
10. Click the Configuration tab, referring to page 177 .
11. Click OK.