Rockwell Automation 1715-OF8I Redundant I/O System User Manual - Manual (Page 75)

Rockwell Automation Publication 1715-UM001C-EN-P - March 2014 75
Installation Instructions Chapter 2
Connect to a 1715-A2A 2-slot Adapter Base Unit
1. When installing the expansion cable from the right-hand side, insert a
cable plug assembly into the 1715-A2A adapter base unit connector.
2. Follow steps 3 , 4 , and 5 above.
3. Insert the cable end into the cable plug assembly and tighten the retaining
screws by hand.
4. Fit the cable socket assembly to the I/O base unit and secure as in steps 4
and 5 above.
5. Fit the other end of the cable into the cable socket assembly.
Extending from
right hand side
3
2
3 4
1
2
3 4
1
2
32082-M
Cable Plug Assembly M3 Socket Cap Screw
M3 Socket Cap Screw
M3 Nut
32060-M
Connect cable plug assembly to
the adapter base connector.
Adapter Base Connector