CTL Lx-Lite VoiceSupport - Manual (Page 110)

System Options
3-76 VoiceSupport LX System Guide
Chapter 3 Customizing Voice Mail
System Options
System Options affect the general performance of the Voice Mail system. All system
parameters are set to default values at the factory to provide a nominal level of
system operation. However, you may want to view the alternate options and select
parameters that are better suited for your particular application.
To view and customize System Options:
1) Select System Options from the Customize section of the main menu. The
General 1 tabbed page of the System Options screen is displayed.
The General 1 tab contains the following System Options:
■ System Password - Once you have initially logged in using the default
password, you can change the password by typing over the current
password and applying the changes.
■ Mailbox Default Security Code - This is the Security Code assigned to
each Subscriber Mailbox that is manually created, after the system is started
up for the first time. The code can contain up to six digits. Subscribers must
enter this Security Code in order to call (log on to) their mailbox for the first
time. After logging on, the Subscriber can change the Security Code.
■ First Trunk Equipment No./Trunk Mailbox Offset -
The First Trunk Equipment Number applies to the first trunk in a Mitel
phone system. Enter this number only when the Voice Mail installation
procedure creates a range of Subscriber mailbox numbers that overlap
trunk numbers in the phone system.
The Trunk Mailbox Offset applies to Lucent Partner Plus, Merlin
Legend, and System 25 phone systems. This value determines the offset
to be added when the numbers for Trunk Mailboxes and Subscriber
Mailboxes overlap. Add the value of Trunk Mailbox Offset to the first
overlapping trunk number. Then use the new trunk numbers to create
Trunk Mailbox numbers.