CTL Lx-Lite VoiceSupport - Manual (Page 21)

Setting Up the Voice Mail Server
In-band Integration for a Generic Phone System
VoiceSupport LX System Guide 2-7
Chapter 2 Installation and Setup
In-band
Integration
for a Generic
Phone
System If a generic phone system is being installed, you can enter the in-band integration
strings manually. These are DTMF digit sequences sent by a PBX to the Voice Mail
to provide incoming call information.
1) Select Generic In-band Integration from the Installation section of the main
menu:
2) Click on the drop-down list and select a function such as Direct Logon or Forward
Busy. Then enter the integration string for that function.
Note - In order to perform this step, the installer must be familiar with the phone
system and have a knowledge of the integration strings required for each
function.
3) Click the Apply Changes button.