CTL Lx-Lite VoiceSupport - Manual (Page 171)

Resetting to Factory Defaults
VoiceSupport LX System Guide 6-11
Chapter 6 Maintenance
Resetting to Factory Defaults
This option erases all recordings, and resets all Voice Mail configuration settings to
their factory default values. All site programming and recorded messages will be
lost. To restore the recordings and settings, you must perform a local restore or use
the CD Recovery procedure.
Warning
- Before you use the Factory Defaults utility, make a current backup of
the Voice Mail database. Then, archive the saved database to a location external to
the VoiceSupport Lx unit.
To reset factory settings to their default value and erase all
recordings:
1) Select Factory Defaults from the Installation section of the main menu.
2) Click the hyperlink Restore Factory Defaults. The following dialog box is
displayed:
3) Click on Factory defaults on next boot, or, cancel the reset. If you click to
proceed with the reset, the following dialog box is displayed:
4) You can still cancel the reset by clicking on Cancel, keep current settings. To
proceed with the reset, reboot the VoiceSupport Lx.
Once the system reboots, all configuration settings will be set to default values. You
will not be able to access the Web Based Interface in order to perform a local
restore until you reinstall the basic feature files.