CTL Lx-Lite VoiceSupport - Manual (Page 189)

Creating a Rescue Backup CD
VoiceSupport LX System Guide 6-29
Chapter 6 Maintenance
5) Click on the Expert tab:
6) Choose CD as the media. (If the CD writer does not function, you have the option
of copying the disk image to the share and then using a network CD burner.)
7) Turn CDW Laser On or Off and select a compression ratio.
8) Click the Build tab.
9) Click the Build Image button. After a few seconds a message will be displayed
showing the start and stop times.
10) Click Refresh. Observe the message "process complete" with no errors.
11) Click the Burn CD button. The CD LED should light while the data is being
written. When complete, the CD will eject automatically. Remove the CD from
the drive.
12) If more than one CD is required, the Disk-Image fields will increment. Repeat
steps 9 and 10 for each additional CD.
13) Restart the Voice Mail service and place the startup mode in Automatic.