Assigning access digits, Setting up the voice mail server – CTL Lx-Lite VoiceSupport User Manual
Page 24
Setting Up the Voice Mail Server
Assigning Access Digits
2-10
VoiceSupport LX System Guide
Chapter 2 Installation and Setup
Assigning
Access Digits
You may need to assign the access digits that the Voice Mail must dial for both local
and long distance callouts.
To assign access digits:
1) Select Tenant Options
from the Customize section of the main menu.
2) Click the Access Digits tab. You see a screen similar to the following:
3) Type the appropriate access digits in the following fields:
■
Before Local Callout - This string contains any digits or characters that the
Voice Mail must dial before it can dial a local call for message notifications
to a home phone, cell phone, or digital pager. The string can contain up to
30 digits including any of the following special codes:
F - Flash
W - Wait for dial tone
P - Pause (Voice Mail pauses 2 seconds, then dials the next digit.)
M - Monitored pause (Voice Mail pauses 2 seconds, then dials the next digit.)
Call Progress tones stop the pause
A - Analyzed pause (Voice Mail pauses 4 seconds, then dials the next digit.)
Answer tones stop the pause.
S - Wait for any type of sound
■
Before Long Distance Callout - This string contains any digits or
characters that the Voice Mail must dial before it can dial a long distance
call. The string can contain up to 30 digits including any of the special codes
listed above.
■
Before Fax Local Callout - This field will not be displayed unless the Fax
Mail option is included in this installation. See separate document Setting
Up and Using Fax Mail
■
Before Fax Long Distance Callout - This field will not be displayed unless
the Fax Mail option is included in this installation. See separate document
Setting Up and Using Fax Mail
4) When you are finished, click the Apply changes button to apply the changes.