CTL Lx-Lite VoiceSupport - Manual (Page 75)

Mailboxes
Subscriber Mailbox
VoiceSupport LX System Guide 3-41
Chapter 3 Customizing Voice Mail
■ Tenant - Enter the Tenant number associated with the Subscriber mailbox.
■ Directory List - This option determines that a caller can name-dial this
Mailbox from a Directory Dialing Mailbox, or a Call Routing Mailbox that is
programmed for an Extension Name Directory. Assign a Directory List to this
mailbox. Possible entries are:
1-100 Allows a caller to name-dial this mailbox only from a Directory
Dialing Mailbox or Extension Name Directory with a Directory
List numbered 1-100.
A Allows a caller to name-dial this mailbox from any Directory
Dialing Mailbox or Extension Name Directory that does not have
a Directory List.
N Does not allow a caller to name-dial this mailbox.
■ Number of Messages - Enter the number of messages (1-1000) that the
Subscriber Mailbox can receive.
■ Bilingual Mode - Select the language that the Voice Mail uses for all the
voice prompts that play after a user calls (logs onto) the Mailbox (e.g., You
have ___ messages. To listen to your messages...). You have a choice
between two languages. Click in the box to view the other selection.
3) Click the Message Notification tab on the Mailbox Options window:
4) The following Callout options can be enabled or disabled:
■ Message Notification - If this option is enabled, the Voice Mail will dial up
to three programmed telephone number when the mailbox receives a voice
message. See Setting Up Message Notification below.
■ Local Callouts - If this option is enabled, the Voice Mail will dial a pre-
programmed local telephone number containing 5-8 digits. The Voice Mail
also recognizes the following toll free numbers as local calls:
1-800-XXX-XXXX 1-877-XXX-XXXX 1-888-XXX-XXXX
■ Long Distance Calls - If this option is enabled, the Voice Mail will dial a
pre-programmed long distance telephone number containing 9 or more
digits.