Metrohm 781 pH/Ion Meter - Manual (Page 115)

7 Various functions
780/781 pH/Ion Meter, Manual
105
7.2.8 Measured values memory report
In the direct types of measurement you can store up to 100 measured
values with <STORE> (see Section 7.3). If you want to print out all the
stored data then you can produce a measured values stored report:
'mw
781 pH/Ion Meter 01104 5.781.0020
date 2004-06-03 13:55:20
#1
pH 7.254
temp. (Pt1000) 20.1 °C
id1 smpl. 1-1
date 2004-06-03 13:54:10
method pH Demo
#2
pH 6.923
temp. (Pt1000) 20.1 °C
id1 smpl. 1-2
date 2004-06-03 13:54:22
method pH Demo
#3
pH 6.575
temp. (Pt1000) 20.1 °C
id1 smpl. 1-3
date 2004-06-03 13:54:36
method pH Demo
--------------
The entries for id1, id2, user and method will only be included in the re-
port if they contain data.
Please note that this is a simple and rapid method of producing meas-
ured values with their most important data. For the complete documen-
tation of measured value results in the sense of the normal quality as-
surance requirements you should select the automatic measuring point
report instead.
REPORT
9
+
RECALL
6