Metrohm 781 pH/Ion Meter - Manual (Page 28)

2.7 Initial configuration
18
780/781 pH/Ion Meter, Manual
2.7 Initial configuration
The pH/Ion Meter is delivered with standard settings for the configura-
tion and method parameters. Many of these can be reset at any time by
pressing the <CLEAR> key during input (see also Section 4.3). If it
should ever be necessary to reset the configuration of the instrument to
its original condition then this can be carried out by a re-initialization of
the instrument memory (see Section 8.5).
Before you start to make measurements please check the following
configuration settings and, if necessary, alter them according to your
own requirements. If you first want to make yourself familiar with the
operation of the pH/Ion Meter and the various editing possibilities then
please read Sections 4.1, 4.2 and 4.4. More detailed explanations of the
individual configuration settings are given in Section 5.
Dialog language: english
CONFIG/Verschiedenes/Dialog:english
After this choice has been confirmed with <ENTER> the dialog lan-
guage changes immediately. For example, this item would then appear.
CONFIG/auxiliaries/dialog:english
Please switch the instrument off and on if this setting has been
changed.
Date and time
CONFIG/auxiliaries/date
and /time
Please check that the date and time are correct.
Temperature sensor and unit
CONFIG/auxiliaries/Temp.sensor
and /Temp.unit
Enter the type of temperature sensor that is connected. If no tempera-
ture sensor is connected and you always want to enter the measuring
temperature manually then you can ignore this setting.