3 show measured values, Show measured values – Metrohm 781 pH/Ion Meter User Manual
Page 118
7.3 Measured values memory
108
780/781 pH/Ion Meter, Manual
7.3.3
Show measured values
With
<RECALL> the menu for displaying or deleting stored measured
values is called up:
measured value memory
>show measured values
del mv store: no
Select the item
Show measured values
in order to access the corre-
sponding display. The last measured value to have been stored with
the highest number will always be shown first:
Measured value no. No. of stored MVs
You can now use the two arrow keys <> and <> to leaf between
the measured values. With <> you can access older entries and with
<> newer ones. You can also leaf beyond the first and last entries
and can in this way access the first entry from the last one and vice ver-
sa.
By pressing
<CLEAR> the displayed entry in the measured value
memory will be deleted directly. In this way you can select any meas-
ured value in the list and delete it individually. The numbering of the
other entries will be changed accordingly, i.e. all the following meas-
ured values will receive a lower number.
In order to delete all measured values you should use <SELECT> in
the above measured values memory menu to select the second choice
del mv store:
and set it to '
yes
'; then confirm this and the follow-
ing safety query
delete ?
with <ENTER>.
RECALL
6
CONTRAST+
CONTRAST -
CLEAR