Metrohm 788 IC Filtration Sample Processor - Manual (Page 126)

5 Interfaces
788 IC Filtration Sample Processor
118
5.2.4 Status messages
To ensure appropriate control of an external control unit is possible, it
must also be possible to request status conditions which provide infor-
mation on the status of the 788 IC Filtration Sample Processor. The
output of a status message is triggered by the trigger '$D' . Status
messages consist of the global status, the detailed status and eventual
error messages. The global status informs on the activity of the proc-
ess, while the detailed status conditions show the exact activity within
the process.
The following global status conditions are possible:
$G Go The IC Filtration Sample Processor is executing the
last command.
$H Hold The IC Filtration Sample Processor has been held
($H, <HOLD> key, or by an error which effects the
hold status).
$C Continue The IC Filtration Sample Processor has been re-
started actively after hold.
$S Stop A process has been aborted, e.g. by pressing the
<STOP> key or because there was an error.
$R Ready The IC Filtration Sample Processor has executed
the last command and is ready.
Detailed status conditions
Status conditions of the global $R:
$R.Mode Basic state: ready to start automatic processing
$R.Assembly An assembly step has been executed.
Status conditions of the global $G:
$G.Mode.Start. Instrument at the beginning of processing
$G.Mode.Start.01.WAIT Instrument processing the start sequence, dis-
plays line number and current command
$G.Mode.Sample.01.WAIT Instrument processing the sample sequence,
displays line number and current command
$G.Mode.Final.01.WAIT Instrument processing the final sequence, dis-
plays line number and current command
$G.Mode. Instrument processing a manual command
$G.Assembly. Instrument processing an assembly command
Status conditions of the global $H:
$H.Mode The status conditions of the global $H are identical with the
ones of the global $G.