Metrohm 788 IC Filtration Sample Processor User Manual
Page 38
2 Installation
788 IC Filtration Sample Processor
30
2.4.7 MIC-7
It is possible to operate the 788 IC Filtration Sample Processor in
combination with an anion IC system with dialysis. For this purpose, the
ultra-filtration cell of the 788 IC Filtration Sample Processor should be
bridged (see section 2.3.10).
The 788 IC Filtration Sample Processor is connected to this anion IC
system consisting of 732 IC Detector, 733 IC Separation Center (two
injectors), 709 IC Pump, 753 IC Suppressor Module, 754 IC Dialysis
Unit, and 762 IC Interface as shown in Fig. 16 using the 6.2125.120
remote adapter, the 6.2125.090 remote connection cable and the
6.2134.080 RS232 cable.
754
753
762
733
709
732
PC
6.2134.100
788
6.2134.080
6.2134.090
6.2128.130
6.2143.220
6.2128.180
6.2115.070
6.2125.120
6.2125.090
6.2141.110
Abb. 16: Interconnection with anion IC system with chemical
suppression and dialysis (MIC 7)
Modular anion system with chemical suppression
and dialysis