Metrohm 788 IC Filtration Sample Processor - Manual (Page 50)

2 Installation
788 IC Filtration Sample Processor
42
2.7.2 Connecting a printer
Before connecting a printer to the RS232 interface, switch off the
788 IC Filtration Sample Processor !!
Printers with the following printer drivers may be connected:
IBM IBM Proprinter and printers with IBM emulation
Epson Epson printers and printers with Epson emulation
Seiko Seiko printers DPU-411 and DPU-414
Citizen Citizen printer IDP562-RS
HP HP printers and compatibles with HP PCL3 emulation
The interface parameters are set in the configuration submenu " >RS232
settings ". Corresponding parameters have to be set on the printer. The
following table provides information on a few selected printers.
Printer Cable RS232 settings Settings on printer
Seiko
DPU-414 6.2125.130 baud rate: 9600
data bit: 8
stop bit: 1
parity: none
handshake: Hws
character set: Seiko
Settings of the DIP switches:
Dip SW Dip SW Dip SW Dip SW----1111 Dip SW Dip SW Dip SW Dip SW----2222 Dip SW Dip SW Dip SW Dip SW----3333
1111 OFF ON ON
2222 ON OFF ON
3333 ON ON ON
4444 OFF ON ON
5555 ON ON OFF
6666 OFF ON ON
7777 ON OFF ON
8888 ON OFF ON
The switchable 7-bit ASCII character set of
the printer will be automatically set to the
national character sets in accordance with
the set dialog language.
Citizen
IDP562-RS 6.2125.050 baud rate: 9600
data bit: 8
stop bit: 1
parity: none
handshake: Hws
character set:Citizen
Settings of the DIP switches:
1 2 3 4 5 6 7 8 9 10
ON
SSW1
The switchable 7-bit ASCII character set of
the printer can be changed to the national
character sets only by setting Dip switch 4
and 5:
4444 5555 Character set Character set Character set Character set
OFF OFF USA
ON ON Great Britain
ON OFF France
OFF ON Germany
Spanish does not have its own character set
(it is best to select French).
Epson LX-300 6.2125.050 baud rate: 9600
data bit: 8
stop bit: 1
parity: none
handshake: Hws
character set: Epson
see printer manual