9 powerup method – Metrohm 788 IC Filtration Sample Processor User Manual
Page 95
4.3 Methods
788 IC Filtration Sample Processor
87
methods
>delete method
Deletion of methods
>delete method
method: ********
8 ASCII characters
Selection of the method
Selection of the method which should be deleted using
the <SELECT> key.
>delete method
delete ******** ?
Confirmation of the deletion
Confirmation with <ENTER>
Abort with <QUIT>
4.3.9 POWERUP
method
When the 788 IC Filtration Sample Processor is switched on, the sam-
ple rack and the needle are brought into the rest position. To bring
them to other positions, the "POWERUP" method can be used. This
method is started automatically, when the 788 IC Filtration Sample
Processor is switched on.
Create a method that contains the command sequence which should
be worked off, when the 788 IC Filtration Sample Processor is switched
on. Store this method under the name
'POWERUP'
(see section 4.3.8).