2 basic settings, 1 configuration – <config> key – Metrohm 788 IC Filtration Sample Processor User Manual
Page 77
4.2 Basic settings
788 IC Filtration Sample Processor
69
4.2 Basic
settings
4.2.1
Configuration – <CONFIG> key
CONFIG
The <CONFIG> key is used for the entry of basic settings of general
applicability. If you have changed the configuration, press <RESET> or
switch on and off the instrument to make the entries effective. The
<CONFIG> key opens the following main menu:
configuration
>auxiliaries
Various general instrument settings
configuration
>rack definitions
Sample rack settings
configuration
>RS232 settings
Settings for RS232 interface
Repeated pressing of the <CONFIG> key selects the submenus in
turn. Use <Ð> or <Ï> to move up or down one menu item; use
<HOME> or <END> to move to the first or last menu item respec-
tively. The submenu is opened with <ENTER>, <QUIT> returns to the
normal state. The following listings show all dialog items which appear
under <CONFIG>. The values shown in the display are the default val-
ues, the possible entry values or ranges are shown below the display.
configuration
>auxiliaries
General instrument settings
>auxiliaries
dialog: english
english,deutsch,
français,español
Dialog
language
english
English
deutsch
German
français
French
español
Spanish
>auxiliaries
display contrast 3
0}7
Display
contrast
0
= large contrast
7
= weak contrast