Metrohm 788 IC Filtration Sample Processor - Manual (Page 61)

4.1 Fundamentals of operation
788 IC Filtration Sample Processor
53
4 Operation
This section provides a detailed description of the operation of the
788 IC Filtration Sample Processor using the keyboard and dialog
display. The overview of the fundamentals of operation and key
functions (section 4.1) is followed by a detailed description of configu-
ration settings (section 4.2), methods (section 4.3), manual operation
(section 4.4), sample racks (section 4.5), standard methods (section
4.6), and filtration principles (section 4.7).
4.1 Fundamentals of operation
4.1.1 Display
The display on the 6.2142.010 keyboard consists of two lines, each
having 24 characters.
The first line serves as a title line in which the current method and the
sample counter reading are displayed. In the edit mode the menu title is
shown.
The second line serves as a status line which displays specific activities
depending on the operating state. In the edit mode it serves as an entry
line.
Normal State
Sample counter Р Р Р Р
Method name О
О О О
Pump status О
О О О
******** counter 1/127
PUMP- ready
Н
Н Н Н Changer status
Method processing
Sample counter
Р Р Р Р
Method name О
О О О
Running sequence О
О О О
******** counter 2/127
START 03 WAIT 11 s
Н
Н Н Н Parameter
П П П П Current command with line number
Edit mode
Menu title О
О О О
Menu line/command О
О О О
>sample sequence
1 MOVE 1 : sample
Н
Н Н Н 2
nd Parameter
Ï 1
st Parameter