Metrohm 788 IC Filtration Sample Processor - Manual (Page 47)

2.6 Installation for simple remote control of the IC system
788 IC Filtration Sample Processor
39
2.6.3 IC system with suppression with PC as "Master"
The 788 IC Filtration Sample Processor is connected to an IC system
with suppression consisting of 732 IC Detector, 733 IC Separation
Center, 709 IC Pump and either 752 Pump Unit or 753 Suppressor
Module as shown in Fig. 20 using the 6.2125.120 adaptor. With this
interconnection, in which the PC is the "Master", the standard methods
'PC' , 'PC Seg' and 'Preconc' can be used (see section 4.6).
788
732
733
709 753
752
Abb. 20: Interconnection with IC system with suppression with
PC as "Master"
2.6.4 IC system for simultaneous anion/cation determination
The 788 IC Filtration Sample Processor is connected to an IC system
for simultaneous determination of anions and cations consisting of two
732 IC Detectors, the 733 IC Separation Center, two 709 IC Pumps and
(if suppression is used) the 753 Suppressor Module as shown in Fig. 21
using the 6.2125.120 adaptor. With this interconnection the standard
methods 'AnCat' and 'AnCatSeg' can be used (see section 4.6).
788
732/1
733
709/1 753
732/2
709/2
Abb. 21: Interconnection for anion/cation system
6.2125.090 cable
6.2125.090 cable
6.2125.060 cable
6.2125.060 cable
6.2125.090 cable
6.2125.120 adaptor
Adapter 6.2125.120
6.2143.200 cable
6.2143.210 cable
6.2141.110 cable
6.2125.090 cable
6.2125.090 cable
6.2125.060 cable
6.2141.120 cable
6.2141.110 cable
6.2143.210 cable