Cyclades User's Guide - Manual (Page 102)

Performing Basic Network Configuration
86 AlterPath KVM/net Installation, Administration, and User’s Guide
Note: Changing the default password closes a security hole that could be easily
exploited.
1. Enter the passwd command.
2. Enter a new password when prompted.
T To Use the wiz Command to Configure Network Parameters
1. Launch the Configuration Wizard by entering the wiz command.
2. At the prompt, enter n to change the defaults.
3. Press Enter to accept default hostname, otherwise enter your own
hostname.
4. Press Enter to disable DHCP.
5. Enter a public IP address to assign to the KVM/net.
[root@ KVM/net /]# passwd
New password: new_password
Re-enter new password: new_password
Password changed
[root@ KVM/net /]# wiz
Set to defaults (y/n)[n]: n
Hostname [ KVM/net]: boston_branch_kvm
Do you want to use DHCP to automatically assign an
IP for your system? (y/n)[n]: n
System IP[192.168.160.10]: public_IP_address