Cyclades User's Guide - Manual (Page 308)

Management
292 AlterPath KVM/net Installation, Administration, and User’s Guide
You need to enter the actual pathname components in the “Directory” and
“File Name” fields. If needed, go to: “To Find the Cyclades Pathname for
Firmware or Microcode Upgrades” on page 289.
The following table defines the information you need to supply on the form.
Field Name Definition
Target The name of the component that you wish to upgrade the microcode.
FTP Server The address of the FTP server where the microcode is located. You can use
any FTP server if you download the firmware on it first. The Cyclades FTP
site address is: ftp.cyclades.com.
Username Username recognized by the FTP server. The Cyclades FTP username for
microcode downloads is “anonymous.”
Password Password associated with the Username. An empty password is accepted
for anonymous login at the Cyclades FTP server
Directory The pathname where the microcode resides on the FTP server. On the
Cyclades FTP server, the directory is under pub/cyclades/
alterpath/KVMnet/released/version_number/filename
.
Go to ftp://ftp.cyclades.com/pub/cyclades/
alterpath/KVMnet/released
in a browser, if needed, to verify the
correct pathname and file names for the microcode for the KVM/net.
File Name The file name of the microcode for the “Target.”