Cyclades User's Guide - Manual (Page 106)

Performing Basic Network Configuration
90 AlterPath KVM/net Installation, Administration, and User’s Guide
Note: If your keyboard has a Return key instead of an Enter key, press the “Return”
key when you see “Enter.”
T To Log into the OSD
1. On the OSD login screen, enter “admin” as the Login name.
2. Enter the password.
The default password is “cyclades.” If the password has been changed
from the default, use the current password.
3. Press Enter.
The OSD Main Menu appears.
4. If you are performing an initial configuration of basic networking
parameters, go to “To Change a Password Using the OSD” on page 91;
otherwise, go to “To Configure Network Parameters Using the OSD” on
page 92.