Cyclades User's Guide - Manual (Page 364)

Modem Connections
348 AlterPath KVM/net Installation, Administration, and User’s Guide
9. Type the username for accessing the KVM/net in the “Username” field.
10.Type the password for accessing the KVM/net in the “Password” and
“Confirm Password” field and click “Next>.”
11.Click the “Finish” button.
The “Connect connection_name” dialog appears.
12.Click the “Cancel” button.
The name of the connection appears on the Network Connections” list.
13.To configure call back, do the following steps.
a. Select the name of the connection from the Network Connections
dialog box.
b. Select “Dial Up Preferences” from the “Advanced” menu.
The “Dial-up Preferences” dialog box appears.
c. Click the “Callback” tab.
d. Click “Always call me back at the number(s) below.”
e. Highlight the name of the modem and click “Edit.”
The “Call Me Back At” dialog box appears.
f. Enter the phone number of your local modem in the “Phone number:”
field, and click OK.
T To Make a PPP Connection From a Remote
Computer
Perform this procedure on a remote computer that has a modem to initialize a
dial up and optional call back session on the KVM/net. This procedure
assumes a PPP connection for dial up or call back has previously been created
as described in “To Configure a PPP Connection on a Remote Computer” on
page 347.
Note: The following steps work if you are on a computer running Windows XP. The
steps are different on computers running other Windows versions or other
operating systems, but you can use these steps as an example.