Cyclades User's Guide - Manual (Page 57)

Introduction 41
Power Management
Controlling Power Through the Web Manager IPDU Power
Management Forms
Through the Web Manager’s IPDU Power Management form, users with
power management permissions can perform power management on any
device plugged into an PM connected to the AUX port. See “Use this form to
connect to servers with either an in-band or a KVM connection. See
“Connecting to Servers Remotely Through the Web Manager” on page 321.”
on page 304.
Administrators must configure users for IPDU power management. See “To
Configure Users to Manage Specific Power Outlets” on page 166. Or see
“Setting Up and Configuring Power Management” on page 42 for a list of all
of the administration tasks involved in setting up power management.
Controlling Power While Connected to KVM Ports
Users who have power management permissions can do power management
while connected to servers through KVM ports by using a keyboard shortcut
that brings up a power management screen. The default keyboard shortcut is
Ctrl+k p.
Administrators must perform multiple configuration tasks in order to set up
and grant users permission for power management. See “Setting Up and
Configuring Power Management” on page 42 for a list of all of the
administration tasks involved in setting up power management.