Cyclades User's Guide - Manual (Page 413)

On Screen Display 397
Configure Menu Overview
The following table shows the AUX port configuration screens.
Table 7-14:KVM Port Configuration Screens
Screen Description
AUX port - Protocol Choices are “Disable,” “Power Management,” and “PPP.”
The Aux port are enabled by default. If you need to disable a
port, select “Disable” and save your changes. To enable a port
select the desired protocol “Power Management” or “PPP.”
If you select Power Management, the following confirmation
screen displays:
If you select PPP, the following connection configuration menu
displays:
AUX port - PPP Appears when PPP is selected from the AUX port - Protocol
screen. Allows you to configure the connection settings for any
PPP connection being made through an external modem
connected to the AUX port.
AUX port - PPP
Baud Rate The port speed.