Cyclades User's Guide - Manual (Page 284)

Configuration
268 AlterPath KVM/net Installation, Administration, and User’s Guide
6. Click “apply changes.”
System
Selecting Configuration>System in Expert mode brings up the System form
as shown in the following figure.
Figure 4-39:System Time and Date Configuration Form
Stop Bits The number of stop bits.
Modem Initialization The modem initialization string.
Local IP Address The IP address of the KVM/net.
Remote IP Address The remote IP address
Authentication
Required Select check box if authentication is
required.
MTU/MRU The maximum transmission unit / maximum
receive units for the PPP.
PPP Options The options for this protocol.
Table 4-13: PPP Fields for Configuring the AUX Port (Continued)
Field Name Definition