Cyclades User's Guide - Manual (Page 451)

435
Table A-1: Boot Message
Booting from Original Boot 2.0.7 (Apr/21/04)
Cyclades Corporation
Testing RAM .............................. SKIPPED
Memory detected: 131072 Kbytes
Testing FLASH ............................ OK
Flash detected: 256 Kbytes
Testing Flash [Configuration] ............ OK
Storage Device Detected .................. OK
Compact Flash SMC128AFA5
Size: 130 Mbytes
Testing Storage Device [Op Code] ......... SKIPPED
Interface Cards Detected ................. OK
1-UART port detected in AUX
16-KVM ports detected
1-local KVM user station port in USER1
1-remote KVM user station port in USER2
Testing Ethernet ......................... OK <--- Press [ESC]
Testing Real Time Clock .................. OK
Testing Serial Number..................... OK
ID is 24939C0B000064
IP Daughter Board #1 Detected ............ OK
IP Daughter Board #2 Detected ............ OK
Watchdog timer ((A)ctive or (I)nactive) [A] : A
Firmware boot from ((F)lash or (N)etwork) [F] : N
Boot type ((B)ootp,(T)ftp or Bot(H)) [T] : T
Boot File Name [zvmppckvm.bin] : zImage_kvm_200.bin
IP address assigned to Ethernet interface [192.168.51.243] :
Server's IP address [192.168.160.1] : 192.168.51.222
MAC address assigned to Ethernet [00:60:2E:01:61:0C] :
Fast Ethernet ((A)uto Neg, 100 (B)tH, 100 Bt(F), 10 B(t)F, 10 Bt(H)) [A] :
Network boot.
Sending a tftp request.
Trying file : zImage_kvm_200.bin