Cyclades User's Guide - Manual (Page 280)

Configuration
264 AlterPath KVM/net Installation, Administration, and User’s Guide
3. Enter the new or modified host address in the IP Address field and the host
name in the Name field.
4. Click the OK button.
5. To delete a host, select the host you wish to delete from the Host Table
form, and select the Delete button on the form.
6. Select “apply changes” to save your configuration to Flash.
Static Routes
The Static Routes form allows you to manually add routes. The Routing Table
defines which interface should transmit an IP packet based on destination IP
information. Static routes are a quick and effective way to route data from one
subnet to another.
T To Add, Edit, or Delete a Static Route
1. In Expert mode, go to: Configuration>Network>>Static Routes.
The Static Routes table form
appears.
Figure 4-37:Static Routes Configuration Form
2. Do one of the following:
• To edit a static route, select a route from the Static Routes form, and
click the Edit button.