Cyclades User's Guide - Manual (Page 324)

308 AlterPath KVM/net Installation, Administration, and User’s Guide
The following table lists the procedures in this chapter.
To Connect to a KVM Port Through the Web Manager Login Screen Page 324
To Connect to Servers Through The Web Manager’s “Connect To Server”
Form Page 322
To Connect to Servers Through the OSD Connection Menu Page 326
To Return to the Connection Menu After Connecting to a Port Page 331
To View Connected Port Information Page 331
To Initiate Cycle by Server Page 332
To Connect to the Next Authorized Server from the Current Server Page 333
To Connect to the Previous Authorized Server from the Current Server Page 333
To Adjust Screen Brightness and Cable Length Page 333
To Reset the Keyboard and Mouse Page 334
To Power On, Power Off, or Reboot the Connected Server Page 335
To Close a KVM Connection Page 336
To Power On, Power Off, Lock, Unlock, or Cycle Devices Plugged into PM
Outlets Page 344
To Configure a PPP Connection on a Remote Computer Page 347
To Make a PPP Connection From a Remote Computer Page 348