Cyclades User's Guide - Manual (Page 167)

Web Manager for Administrators 151
Wizard Mode
Figure 4-6:Network Settings in Wizard Mode
3. If the “DHCP” check box is not checked, enter the network information in
the fields.
4. Click the “apply changes” button.
Note: If you change the KVM/net’s IP address and apply the changes, you will need
to reconnect to the Web Manager with the new IP address.
5. Press the “Next” button or select “Step 3: Access” from the left menu.
Step 3: Access [Wizard]
In Wizard mode, selecting “Step 3: Access” brings up a form for adding or
deleting users and for setting or changing passwords. Use this form if you
want to add user accounts to allow other administrators to administer
connected devices without being able to change the configuration of the
KVM/net. The administrator can configure added users to administer the
KVM/net by assigning them to the “admin” group.