Cyclades User's Guide - Manual (Page 190)

Configuration
174 AlterPath KVM/net Installation, Administration, and User’s Guide
The following table summarizes the format of the hot keys for KVM
connections, the defaults, and where they can be redefined.
T To Redefine KVM Session Keyboard Shortcuts
1. Go to Configuration>KVM>General in Expert mode.
The General form appears.
2. To redefine the “Common Escape Sequence” enter a key combination
starting with the Ctrl key and followed by a letter, for example, Ctrl m.
3. To redefine the command key portion of any KVM-session keyboard
shortcuts, do one of the following steps.
• To change the command key for administrators who access KVM ports
through the User 1 port, go to the User 1 tab.
• To change the command key for administrators who access KVM ports
through the User 2 port, go to the User 2 tab.
• To change the command key for users who access KVM ports through
the Web Manager, go to the IP Users tab.
Common
Escape
Sequence Command Key Where Defined
Format “Ctrl” +
“letter key” “letter key” • Configuration>KVM>General>
General
Defaults Ctrl+k “p” to bring up the
“power management”
window, “q”
to quit. See Table 6-4,
“Default KVM
Connection Keyboard
Shortcuts,” on
page 329 for all the
default command keys. • Configuration>KVM>General>
User 1
• Configuration>KVM>General>
User 2
• Configuration>KVM>General>
IP Users