Cyclades User's Guide - Manual (Page 232)

Configuration
216 AlterPath KVM/net Installation, Administration, and User’s Guide
You will see the path "Domain NC[domain.com].
3. Double click "Domain NC[domain.com].
You will see expanded path "DC=xxx,DC=xxx,DC=com".
4. Double click "DC=xxx,DC=xxx,DC=com".
You will see the expanded classes "CN=Builtin, ..."
5. Double click "CN=Users".
You will see the expanded users list.
6. Right click an admin user and select "Properties".
You will see the window "CN=<username> Properties".
7. In the Optional, "Select a property to view:" , locate [comment].
8. In the field "Edit Attribute", enter [ group_name=admin ] and click [OK].
9. Close or save the remaining windows.
T To Configure an NIS Authentication Server
Perform this procedure to identify the authentication server when the KVM/
net or any of its ports is configured to use the NIS authentication method or
any of its variations (Local/NIS, NIS/Local, or NIS/DownLocal).
1. Go to Configuration>Authentication>NIS in Expert mode.
The NIS form displays as shown in the following figure.