To set the kvm/net’s date and time manually, To set the time and date with ntp, Der “to set the – Cyclades User's Guide User Manual
Page 286
Advertising
Configuration
270
AlterPath KVM/net Installation, Administration, and User’s Guide
T
To Set the KVM/net’s Date and Time Manually
1. In Expert Mode, go to: Configuration>System>Time/Date.
The Date/Time form appears.
2. Make sure that Disabled is selected in the Network Time Protocol drop-
down list.
3. Fill in the date and time fields by selecting the appropriate numbers from
the drop-down lists.
4. Click “apply changes.”
T
To Set The Time and Date With NTP
1. In Expert Mode, go to: Configuration>System>Time/Date.
The Date/Time form appears.
2. Choose Enable from the Network Time Protocol drop-down list.
The NTP Server field appears.
Advertising