Cyclades User's Guide - Manual (Page 262)

Configuration
246 AlterPath KVM/net Installation, Administration, and User’s Guide
The Add Rule dialog box appears.
4. Complete the following data fields as necessary:
Field Name Definition
Target Indicates the action to be performed to the
IP packet when it matches the rule. For
example, the kernel can ACCEPT DROP,
RETURN, LOG or REJECT the packet by
sending a message, translating the source
or the destination IP address/port or
sending the packet to another user-defined
chain.
Source IP The source IP address.
Mask Source network mask. Required when a
network should be included in the rule.
Inverted Select the check box adjacent to Source IP
to invert the target action. For example,
the action assigned to the target will be
performed to all source IPs/Masks except
to the one just defined.
Destination IP Destination IP address.